About Us | Contact Us | contact@anyimeasuring.com China Measuring Tool & Instrument Manufacturer Based in Guilin - Tel: +86 773 5869135

Leave Quick Message

What Customer Say

Share |

Products

  • Vernier Depth Gauge
  • Digital Depth Gauges With Adjustable Base Extension

    Digital Depth Gauges With Adjustable Base Extension

    * Can measure groove width and position of a groove * Wider base extension * Power on/off * In/mm conversion * Zero at any position * Data output.

    4 Items
  • Long jaw tip internal inside diameter digital vernier caliper Inside Knife-edge
  • Groove Width Digital Calipers
  • Gauge Blocks Gauge Block Set

    Gauge Blocks Gauge Block Set

    Gauge blocks (also known as gage blocks, Johansson gauges, slip gauges, or Jo blocks) are a system for producing precision lengths. The individual gauge block is a metal block that has been precision ground and lapped to a specific thickness. Gauge blocks come in sets of blocks with a range of standard lengths. In use, the blocks are stacked to make up a desired length. An important feature of gauge blocks is that they can be joined together with very little dimensional uncertainty. The blocks are joined by a sliding process called wringing, which causes their ultraflat surfaces to cling together. A small number of gauge blocks can be used to create accurate lengths within a wide range. By using 3 blocks from a set of 30 blocks, one may create any of the 1000 lengths from 3.000 to 3.999 mm in 0.001 mm steps (or .3000 to .3999 inches in 0.0001 inch steps). Gauge blocks were invented in 1896 by Swedish machinist Carl Edvard Johansson.[1] They are used as a reference for the calibration of measuring equipment used in machine shops, such as micrometers, sine bars, calipers, and dial indicators (when used in an inspection role). Gauge blocks are the main means of length standardization used by industry.

    7 Items
  • Two-Point Internal Digital Calipers

    Two-Point Internal Digital Calipers

    Two-Point Internal Digital Calipers Two kinds of resolution:0.001mm and 0.01mm It is convenient to keep the beam balance while measuring. The positioning is accurate which can avoid teh manual interference. With force limit devices, it can avoid the error by manual operation. The measuring range is larger than those three-point internal micrometers. It can measure the diameters; even can measure the cone angle of small hole by the equal sizing blocks.

    3 Items
  • Gap and step gauge B-Squared GAPSG Non Marring Gap and Step Gauge

    Gap and step gauge B-Squared GAPSG Non Marring Gap and Step Gauge

    Gap and step gauge This caliper can easily check the planeness of any surface. The Gap & Step Gauge is the ideal tool for measuring both flush and gap with one hand. The innovative new design allows the user to zero out both gap and flush simultaneoulsy. Great solution for all manufacturing fit and finish needs. Measuring both flush and gap only by one hand. Great solution for all manfacturing fit and finish needs. Small and easy to operate mm/inch conversion Zero-setting at any position

    1 Items
  • Caliper Type Micrometers

    Caliper Type Micrometers

    Caliper Type Micrometers High Resolution 0.001mm It looks like a micrometer, accords with the Abbe's principle. It is the combination of calipers and micrometers. However it is not operating like micrometers, you just operate it in a caliper form, quick, convenient and accurate than those micrometers This Caliper type micrometer has higher accuracy than micron digital calipers.

    1 Items
  • Vernier Depth Gauges(Hook Type)

    Vernier Depth Gauges(Hook Type)

    Vernier Depth Gauges(Hook Type) Used for depth measurement Can measure the width of groove and position of groove

    0 Items
  • Digital tires thread depth gauge gage Thin Rod pit gauge

    Digital tires thread depth gauge gage Thin Rod pit gauge

    Tire depth gauge Special designed to measure tire thread depth Come with a 2mm testing rod mm and inch conversion zero setting as any position Display: LCD Battery: SR44 Battery Life: Approx. 3 years under normal use

    1 Items

About Us / Privacy Policy / Terms and Conditions / Links / Site Map / Contact Us