Products
-
High Precision Digital Calipers 0,005mm resolution
The device is fast, accurate, easy to use. Floating zero for easy comparative measurements. Large LCD display shows a resolution as high as 0.005mm with data output mode status. Its permissable error is 0.015mm.
2 Items
-
IP54 Water Damp Proof Digital Calipers
The device has optional metal casing and damp proof of IP54 standard, which make it be safe and accurate to use under 80% relative humidity and dusty environment. Floating zero for easy comparative measurements.
3 Items
-
Digital Vernier Calipers with Carbide-tipped measuring faces
Digital Calipers with Carbide-tipped measuring faces is fitted with Tungsten steel surfaces, allowing the device to be more durable and longer while measuring harder objects. Like other standard calipers, this caliper also does measuring of outside, inside, depth and "step" work. Floating zero for easy comparative measurements. This Calipers come with data output and allows for quick and easy data collection.
3 Items
-
Standard digital caliper
Anyi's standard caliper can measure OD, ID and depth. It carries a large and clear LCD readout. The Inch/Metric conversion easily change between Imperial and metric reading. Zero-setting at any position. Connected with a data wire, data output interface enables data collection by computer. The caliper uses 1.5V button cell which is easily purchased. Available with carbide-tipped measuring faces to improve the durability and working life. Accessries: Packing box, battery and user manual.
4 Items
-
Dial Caliper
With shock resistant and durable steel-alloy surface, this precision tool will deliver unfailing .002" accuracy long after the best reloading dies have worn out. Comes with storage case. Its relatively new feature is the ability of the inside measurement jaws to pass by each other so smaller dimensions can be read and a single scale is needed which further makes the readings easier to determine.
3 Items
-
Inside Groove Calipers with Flat Points Inside Groove Digital Vernier Calipers i
Contact points are flat, which can achieve narrow and small inside groove. Three types are available for the customer’s favor, digital type, dial type and vernier type.
9 Items
-
Inside Caliper with knife-edged for Grooves
With knife points, the device can easily measure the very small groove and track which is hard to reach in the past. And it has the cross-interaction jaws to reach a small inside hole.
12 Items
-
Inside Groove Calipers with Round Points
With round points, the device can make a convenient measurement for the small inside hole. Large LCD display for easy reading.
12 Items
-
Centerline Digital Calipers
Digital caliper with conical jaws can measure the center distance between two holes. Touch points can be adjusted up and down to measure the holes in different height. Large LCD display a direct reading graded at 0.01mm.
10 Items
-
Screw Thread Digital Calipers
The instrument, calibrated by master gauges for a higher accuracy, is used to measure the working and single pitch diameters of internal and external threads. Carbide-tipped jaws for durability.
6 Items