About Us | Contact Us | contact@anyimeasuring.com China Measuring Tool & Instrument Manufacturer Based in Guilin - Tel: +86 773 5869135

Leave Quick Message

What Customer Say

Share |

Special Calipers

  • Dial Saw Kerf Gauges
  • V-Anvil Digital Calipers measure three points round objects screw tap

    V-Anvil Digital Calipers measure three points round objects screw tap

    This digital caliper is designed to measure the diameter of workpiece with odd flutes, such as end mills, taps, reamers and the like.

    7 Items
  • offset c
  • Two-Point Internal Digital Calipers

    Two-Point Internal Digital Calipers

    Two-Point Internal Digital Calipers Two kinds of resolution:0.001mm and 0.01mm It is convenient to keep the beam balance while measuring. The positioning is accurate which can avoid teh manual interference. With force limit devices, it can avoid the error by manual operation. The measuring range is larger than those three-point internal micrometers. It can measure the diameters; even can measure the cone angle of small hole by the equal sizing blocks.

    3 Items
  • Gap and step gauge B-Squared GAPSG Non Marring Gap and Step Gauge

    Gap and step gauge B-Squared GAPSG Non Marring Gap and Step Gauge

    Gap and step gauge This caliper can easily check the planeness of any surface. The Gap & Step Gauge is the ideal tool for measuring both flush and gap with one hand. The innovative new design allows the user to zero out both gap and flush simultaneoulsy. Great solution for all manufacturing fit and finish needs. Measuring both flush and gap only by one hand. Great solution for all manfacturing fit and finish needs. Small and easy to operate mm/inch conversion Zero-setting at any position

    1 Items
  • Caliper Type Micrometers

    Caliper Type Micrometers

    Caliper Type Micrometers High Resolution 0.001mm It looks like a micrometer, accords with the Abbe's principle. It is the combination of calipers and micrometers. However it is not operating like micrometers, you just operate it in a caliper form, quick, convenient and accurate than those micrometers This Caliper type micrometer has higher accuracy than micron digital calipers.

    1 Items
  • API RTJ Ring Groove Measuring face flange seal vernier caliper 23 Deg

    API RTJ Ring Groove Measuring face flange seal vernier caliper 23 Deg

    Ring Groove Measuring,RTJ Ring groove face caliper,Denotes API critical dimension, break sharp corner typical, groove dimensions for type "R" and "RX" gaskets, size API 6A, API 3-5m ANSI. Easy measre the pitch diameter of the Ring joint groove face. Pitch Diamter=(ID+OD)/2

    4 Items
  • Groove Depth Digital Calipers

    Groove Depth Digital Calipers

    Groove Depth Digital Calipers Measuring the groove depth Pre-placed function

    2 Items
  • API Ring Groove joint facings Rtj seal caliper

    API Ring Groove joint facings Rtj seal caliper

    Ideal for ring grooves and ring joint Facings applicatioins in oil, gas&petrochemical industry! Meet ASME/ANSI B16.5 & 16.47 The Most Economical& Easy Way To Check RTJ, API Ring Grooves and all ring joint facings. Unique Measuring Instrument Designed specifically for oilfield industry. The Series of API Ring Groove Checker Inspect all types of API Ring seal Groove i.e RTJ’s Groove. It is a modified form of vernier caliper. It can be used to check, OD, ID and pitch diameter of the Ring joint facings. Pitch diameter=(ID+OD)/2+20mm During RTJ’s groove manufacturing, RTJ’s groove checking is an important criteria. Our RGC Caliper reduces all the headache of checking RTJ’s groove while machining. It saves rework & rejection cost of RTJ’s groove by giving direct accurate reading. During machine of RTJ’s groove we can save machine The Checking Process RTJ groove measuring instruments The checking process of RTJ's groove with RGC calipers is very simple, RGC is properly Position on falt surface of RTJ's groove. The precision contact point of ball touches the angular portion of the groove. The RGC Caliper gives the reading, from this reading we can subtract/Add some constant valve to obtain final drawing reading of RTJ's groove Features: 1) Does not required any setting gauge or parameter. 2) Gives accurate readingin micron or inch 3) Measure all parameter of RTJ's groove(OD, ID, PCD) 4) Covers all types of RTJ's groove i.e. R, RX, BX 5) Gives 100% Repeatability. 6) No skilled person required. 7) Save rework or rejection headached. 8) Saves time, saves money 9) Easy to handle, easy to store, easy to use. 10) Coolan-proof, corrosion resistance.

    1 Items
  • Small Digital vernier Cliper thickness gauge measurement jewellery gemstones

    Small Digital vernier Cliper thickness gauge measurement jewellery gemstones

    1) Small vernier caliper used for measurement of jewellery and gemstones. 2) Portable, light and easy to operate with one single hand. 3) Measure small workpieces, such as jewelry, ecectronic components. 4) Zero-setting at any position. 5) Inch/mm conversion at any position.

    2 Items

About Us / Privacy Policy / Terms and Conditions / Links / Site Map / Contact Us