About Us | Contact Us | contact@anyimeasuring.com China Measuring Tool & Instrument Manufacturer Based in Guilin - Tel: +86 773 5869135

Leave Quick Message

What Customer Say

Share |

Special Calipers

  • Dial Waterproof Api Ring Groove vernier Caliper

    Dial Waterproof Api Ring Groove vernier Caliper

    API Ring Groove Caliper (RGC) will give prompt, accurate & instant reading of all types of Bx, Rx & R types of face groove. It reduces the time & hidden cost involves in checking such types of grooves. RGC FEATURES : Does not required any setting gauge or master piece or any parameters. Gives accurate reading in microns. Measures all parameters of RTJ`s groove (OD, ID, PCD). Covers all types of RTJ`s groove i.e. R, Rx, Bx. Gives 100 % repeatability. No skilled person required. Save rework & rejection headache.

    1 Items
  • Knife point inside groove vernier caliper

    Knife point inside groove vernier caliper

    * Facilitate measurement of a diameter of a narrow groove in a hole through thinner jaws * Made of stainless steel

    3 Items
  • Inside Groove digital vernier Caliper with knife points hook

    Inside Groove digital vernier Caliper with knife points hook

    Cross interaction jaws which can achieve to a small inside hole. Presetting fuction which will keep accurate even abrasion. Special order you must to advise below date 1) The diameter of the hole 2) The distance from the groove to the orifice 3) The width of the groove 4) The depth of each groove 5) The shape of the groove bottom

    12 Items
  • Wide measure face calipers for extruding lines

    Wide measure face calipers for extruding lines

    Wide measure face calipers for extruding lines

    1 Items
  • Wide-jaw Wire rope Calipers

    Wide-jaw Wire rope Calipers

    Digital calipers with wide measuring face, specially designed to accratelydetermine wire rope diameters

    1 Items
  • Inside Groove Calipers with Flat Points Inside Groove Digital Vernier Calipers i

    Inside Groove Calipers with Flat Points Inside Groove Digital Vernier Calipers i

    Contact points are flat, which can achieve narrow and small inside groove. Three types are available for the customer’s favor, digital type, dial type and vernier type.

    9 Items
  • Inside Caliper with knife-edged for Grooves

    Inside Caliper with knife-edged for Grooves

    With knife points, the device can easily measure the very small groove and track which is hard to reach in the past. And it has the cross-interaction jaws to reach a small inside hole.

    12 Items
  • Inside Groove Calipers with Round Points

    Inside Groove Calipers with Round Points

    With round points, the device can make a convenient measurement for the small inside hole. Large LCD display for easy reading.

    12 Items
  • Centerline Digital Calipers

    Centerline Digital Calipers

    Digital caliper with conical jaws can measure the center distance between two holes. Touch points can be adjusted up and down to measure the holes in different height. Large LCD display a direct reading graded at 0.01mm.

    10 Items
  • Screw Thread Digital Calipers/Thread distance calipers

    Screw Thread Digital Calipers

    The instrument, calibrated by master gauges for a higher accuracy, is used to measure the working and single pitch diameters of internal and external threads. Carbide-tipped jaws for durability.

    6 Items

About Us / Privacy Policy / Terms and Conditions / Links / Site Map / Contact Us