Apothem Centerline Digital Vernier Calipers distances between hole

FEATURES

Apothem and Centerline Digital Calipers/distances between the hole calipers

1.Can measure the center distance between two hole.

2.Can measure the distance between edge and center.

3.Centerline contacts can be slid up and down to measure the center distance between stepped holes.

4.The caliper with presetting function for easy measuring is optional.

Range(mm/in)	Resolution	Permissible Error	Order No.	Price
5-150mm	0.01mm	±0.03mm	115-221	$132.26USD
10-150mm	0.01mm	±0.3mm	115-221-1	$132.26USD
20-150mm	0.01mm	±0.03mm	115-221-2	$140.33USD
5-200mm	0.01mm	±0.04mm	115-222	$161.29USD
10-200mm	0.01mm	±0.04mm	115-222-1	$161.29USD
20-200mm	0.01mm	±0.04mm	115-222-2	$161.29USD
5-300mm	0.01mm	±0.05mm	115-223	$270.97USD
10-300mm	0.01mm	±0.05mm	115-223-1	$270.97USD
20-300mm	0.01mm	±0.05mm	115-223-2	$270.97USD

Complement

Questions & Comments

Andor on March 23, 2017, 3:44 pm

To answer the questions about the max hole sizes ^^ Its pretty logical that the min range size is equal to the OD of the pins... So min range 5 = 5mm OD pin
Andor on March 23, 2017, 3:44 pm

To answer the questions about the max hole sizes ^^ Its pretty logical that the min range size is equal to the OD of the pins... So min range 5 = 5mm OD pin
Fanny on October 21, 2016, 10:09 am

I think it is a truely point of view. I most often meet people who rather say what they suppose others want to hear. Good and well wrnttei! I will come back to your site for sure!
Jason Howard on January 14, 2016, 7:52 pm

I am looking for 60" long apothem and centerline digital calipers. Do you guys make them that long?
rsmastech on October 9, 2015, 5:16 am

Do you sell the Apothem and Centerline caliper in the USA?
rsmastech on October 9, 2015, 5:14 am

Do you sell the Apothem and Centerline caliper in the USA? Please let me know distribuitor information in USA
Richard Tellis on July 7, 2015, 6:02 am

I am interested in the Apothem Centerline Digital Vernier Calipers. I will be measuring distance from Edge to Centre of a 12mm hole. What is the maximum and minimum hole size for these callipers?
Eric Kruger on May 7, 2015, 6:22 pm

Good Morning, We are a Federal Civilian lab at Pearl Harbor Naval Shipyard looking for an instrument to accurately measure 2 inch gage length punch marks for R-1 specimens. We currently use a divider that has been sharpened to a point so that it fi
Ken on April 22, 2015, 2:18 pm

what is the largest size hole that this can be used for??

Name (required)

Mail (will not be published) (required)

Verification Code:

Product Detail

More Photos:

1) Range 5-150mm as below

10-150mm photo as below