About Us | Contact Us | contact@anyimeasuring.com China Measuring Tool & Instrument Manufacturer Based in Guilin - Tel: +86 773 5869135

Leave Quick Message

What Customer Say

Share |

We are using them and they work fine.

 We are using them and they work fine. The only issue we had is that the
two smaller calipers had  tips with two deferent sizes 7mm & 6.9mm . Luckily
the bigger caliper had 7mm tip on it ,so we swapped it out with the smaller
caliper. That way we had a standard tips on both small calipers. In the future
when we order other ones, is it  possible to order the calipers with the same

size tips?

http://www.anyimeasuring.com/products/rtj-ring-groove-measuring-face-caliper-api-flange-seal-caliper.html

  We had to make a chart to add the tip size on to the ring groove sizes to get
a standard size in the shop to use them. That’s why the tips need to be a standard
size.
                                                         Thanks,
                                                                   Dean

About Us / Privacy Policy / Terms and Conditions / Links / Site Map / Contact Us